Pressure Regulator Unit
APPLICATION
The PRS-Dial is the perfect tool for adjusting valve outlet pressure regardless of inlet pressure, allowing quick and easy adjustment. The regulator is used with all Rain Bird PGA, PEB, PEsB, BPE and BPES series valves.
It sets and maintains a constant outlet pressure within ±0.21 bar between 1.04 and 6.90 bar.
The adjustment knob with position locks allows for fine adjustment in increments and decrements of 0.02 bar. The button cartridge allows for quick, easy and complete assembly and adjustment
GENERAL CHARACTERISTICS
Enhanced anti-blocking capabilities reduce water impact.
Ergonomic design with snap-on lid to prevent vandalism.
Waterproof button cartridge eliminates fogging and jamming.
Easy field installation. PRS-Dial is installed under the solenoid and adapter.
Corrosion-resistant cam-filled nylon for strong performance.
EXERCISE INTERVAL
Pressure
Adjustment: 15 to 100 psi (1.04 to 6.90 bar)
Accuracy: ± 3 psi (±0.21 bar)
Debi: look at the board
* While the PRS-Dial can withstand pressures up to 13.80 bar, the correct pressure setting can only be maintained up to 6.90 bar.
MODELS
PRS-Dial
APPLICATION INFORMATION
Proper operation requires that the inlet pressure be at least 1.04 bar higher than the desired outlet pressure.
For areas with very high pressure or uneven soil surface, install the sprinkler with BSC pressure regulation pins and/or SAM check valves.
When the inlet pressure exceeds 6.90 bar, a pressure regulating main valve or line-inlet pressure regulator is required.
Rain Bird does not recommend using the pressure adjustment module for applications outside of the recommended flow rates.
Rain Bird recommends using a flow rate of no more than 2.29 m/s in the supply line to reduce water hammer effects.
Rain Bird recommends that for flows below 2.27 m3/hr, the flow control shaft should be closed by two full turns from the fully open position.
Address delivery
In the case of payment by bank transfer, we individually agree on a delivery date after receiving payment.
Our own fleet consists of 3, 9, 12 meter vehicles.
Delivery of goods in the city of Baku is carried out when ordering from 200 kg. To districts and neighboring cities when ordering from 1000 kg.
Delivery of goods within 1-2 working days after payment.
Our transport
Pickup from the warehouse
You can also pick up the goods from our warehouse in your own car.
Payment by bank transfer
For corporate clients, we accept payment by bank transfer. After placing the order, an invoice for payment will be generated, which you can pay according to the details sent to your email address. The funds will be credited to our account within 1-2 hours after the payment of the order.
Cash payment
If you want to buy goods for cash, it is better to call us by phone or write to the mail.
Thus, together we will quickly clarify all the nuances, cost and features of the product you are interested in.
Cash payment is made at the pickup point in our warehouse.
Upon receipt of the goods, be sure to check the completeness of the order and receipt.
Non-cash payment method (bank card)
You can buy goods by non-cash payment method (bank card) at the pickup point in our warehouse.
