Pressure Maintaining Pressure Reducing Control Valve
100,00 ₼
PRODUCT DESCRIPTION
Pressure stabilization and pressure reducing control valves are control valves that provide adjustment of inlet and outlet pressure in low-slope systems. Regulates excess flow and high pressure in downslope systems and ensures system operation at normal values. It keeps the outlet pressure stable without being affected by pressure fluctuations.
Montage
The valve can be installed in a vertical or horizontal position.
When installing the valve, it must be flush with the pipeline.
Mount the valve on the line in the direction of the arrow shown on it.
When installing the valve in the line, isolation valves (sliding valve, butterfly valve, dirt trap, etc.) can be installed before and after the valve.
Maintenance
Check and clean the finger filter at the valve inlet according to the water quality. Do not clean the filter more than once every few months unless the water is very dirty.
Check the outlet pressure value periodically.
Manual Operation
The valve can be closed manually using the ball valve [b2] located at the outlet of the valve.
Technical Specifications
It works with mains pressure and does not need extra energy
easy and accurate adjustment to the desired pressure
Ability to work without being affected by pressure and flow changes in the system
Easy maintenance
Adjustment
Start the pump or supply water to the system by opening the main valve in the network.
Open the ball valve indicated by “c” and close the ball valve indicated by “d”.
Adjust the desired inlet pressure value by looking at the manometer with the adjustment screw on the pressure stabilization pilot valve indicated by “a”. After determining the setting point, tighten the counter nut.
Adjust the pressure reducing pilot valve indicated by “b” by means of the adjustment screw (b1) located on it, looking at the manometer. The manometer on the pressure reducing pilot valve shows the valve outlet pressure value.
After determining the desired pressure point in both pilot valves, open the ball valve indicated by “b2” and supply water to the system. During the normal operation of the valve, the inlet pressure gauge will show the inlet pressure value of the valve, and the outlet pressure gauge will show the zero value. Close the ball valve “b2” to see the output pressure value.
Address delivery
In the case of payment by bank transfer, we individually agree on a delivery date after receiving payment.
Our own fleet consists of 3, 9, 12 meter vehicles.
Delivery of goods in the city of Baku is carried out when ordering from 200 kg. To districts and neighboring cities when ordering from 1000 kg.
Delivery of goods within 1-2 working days after payment.
Our transport
Pickup from the warehouse
You can also pick up the goods from our warehouse in your own car.
Payment by bank transfer
For corporate clients, we accept payment by bank transfer. After placing the order, an invoice for payment will be generated, which you can pay according to the details sent to your email address. The funds will be credited to our account within 1-2 hours after the payment of the order.
Cash payment
If you want to buy goods for cash, it is better to call us by phone or write to the mail.
Thus, together we will quickly clarify all the nuances, cost and features of the product you are interested in.
Cash payment is made at the pickup point in our warehouse.
Upon receipt of the goods, be sure to check the completeness of the order and receipt.
Non-cash payment method (bank card)
You can buy goods by non-cash payment method (bank card) at the pickup point in our warehouse.
